AM3270 and TR3271 Configuration and Management Manual

Attribute Descriptions for AM3270 and TR3271
AM3270 and TR3271 Configuration and Management Manual—529993-001
6-4
DEBUG
DEBUG
The DEBUG attribute enables or disables the CLIP debug interface. This attribute
is not intended for customer use and should be left in the Off state.
DROPRTS
The DROPRTS attribute enables or disables the clear Request-to-Send (RTS)
upon a switch from write to read. Off means do not clear the Request-to-Send
signal.
EOTIFNOREAD
The EOTIFNOREAD On attribute means that the AM3270 subsystem will send an
EOT upon receiving text from a subdevice that does not have a read outstanding
after the retry count (defined by the RETRIES attribute) is exhausted. If this
attribute is Off, an RVI is sent.
Default: Off
Range: On or Off
Objects: Lines
Profile Equivalent: None
Default: Off for AM3270. On for TR3271
Range: On or Off
Objects: Lines
Profile Equivalent: DROPRTS, NODROPRTS, CLEARCA or NOCLEARCA
Note: This is an AM3270 attribute.
Default: Off
Range: On or Off
Objects: Lines
Profile Equivalent: EOTIFNOREAD or RVIIFNOREAD