AM3270 and TR3271 Configuration and Management Manual

Attribute Descriptions for AM3270 and TR3271
AM3270 and TR3271 Configuration and Management Manual—529993-001
6-14
WACKDELAY
WACKDELAY
The WACKDELAY attribute specifies the time to wait before sending a WACK, in
0.01 second units. The range of values is 0 through 5:27.67.
WACKIFNOREAD
The WACKIFNOREAD attribute enables sending a WACK to a SELECT when the
subdevice is open but no READ is posted. The range of values is On or Off.
XLATEIN
If the TRANSLATE attribute is On, this table is used as a translate table for
inbound (or outbound) data. If this attribute is used to define a translate table, all
256 bytes must be specified.
10,6 CRT subdevice with a 27 x 132 screen
size
60,1 TR3271 PTP CRT subdevice
60,2 TR3271 PTP printer subdevice
Note: This is a TR3271 attribute.
Default: 0
Range: 0 through 5:27.67
Objects: Lines
Profile Equivalent: WACKDELAY
Note: This is a TR3271 attribute.
Default: Off
Range: On or Off
Objects: Lines
Profile Equivalent: WACKIFNOREAD or NOWACKIFNOREAD
Default: On
Range: 0 through 255
Objects: Lines
Profile Equivalent: None
Device Type and
Subtype Meaning