AM3270 and TR3271 Configuration and Management Manual

Error Messages for AM3270
AM3270 and TR3271 Configuration and Management Manual—529993-001
D-2
Message Descriptions
In general, a data communications line can incur file-system errors of the types shown
in Table D-3.
Message Descriptions
The AM3270 error messages are listed by message number, from lowest to highest.
00002
Cause. The operation failed because of an internal DLC task problem. This usually
happens on an ADD SU command.
Effect. Operation failed.
Recovery. See EMS message 74, “PROCESS INTERNAL ERROR,” on the console
or in the EMS log. In that message, the error, the CLIP function modifier, and the CLIP
status are listed in the following format:
%nnnnnn %nnnnnn %nnnnnn
Save these octal numbers and contact your HP service provider.
00003
177 Text overrun.
179 Application buffer is improper.
180 Unknown device status received.
181 Status receipt currently enabled for subdevice.
Table D-3. Table C-3. File-System Error Types
Error Numbers Description
10-30 Coding or access problem
30-33 System configuration problem
120-199 Device hardware problem
200-255 Path error
AM3270 00002 The DLC task encountered a problem.
AM3270 00003 Target object was not found.
Table D-2. File-System Error Summary for AM3270 (page 2 of 2)
Error Number Description
* After a line ownership change has occurred, there is a period of time during which an application can receive
this error. Note that the application should retry its request when this error is received.