AM3270 and TR3271 Configuration and Management Manual

Error Messages for TR3271
AM3270 and TR3271 Configuration and Management Manual—529993-001
E-4
Message Descriptions
Cause. A STOP command has been issued for a line, but at least one SU is currently
opened by applications.
Effect. Command could not be completed.
Recovery. Close all SUs before stopping the line.
00009
Cause. A STOP command has been issued for a line, but at least one SU is currently
opened by applications.
Effect. Command could not be completed.
Recovery. Close all SUs before stopping the line.
00010
Cause. The specified target object name is an invalid object name.
Effect. Command could not be completed.
Recovery. Check the format of the target object name, make any corrections, and try
the command again.
00011
Cause. An ownership error has occurred on an I/O operation. This usually means that
the preferred TCP/IP is either not present or LAN controller ownership has switched to
another CPU.
Effect. Command could not be completed.
Recovery. Correct any configuration or operational problems and re-issue the
command.
00012
Cause. A STOP command has been sent to a PTP SU that is connected.
Effect. Command could not be completed.
Recovery. Disconnect the SU before trying to stop it, or use the ABORT command.
TR3271 00009 SU is not connected to target SU.
TR3271 00010 Invalid target object name.
TR3271 00011 No owner.
TR3271 00012 PTP connection present.