AM3270 and TR3271 Configuration and Management Manual

Error Messages for TR3271
AM3270 and TR3271 Configuration and Management Manual—529993-001
E-6
Message Descriptions
Recovery. Make sure that 256 characters have been specified.
00506
Cause. An invalid value was received for the object name in an ALTER command.
The first wild card shows the attribute. For example, PACE or TRANSLATE. The
second wild card shows the object name. For example, $AM32S1. If you entered the
command ALTER LINE $AM32S1...TRANSLATE 2, and SCF required an On or an Off,
you would receive this error.
Effect. Command could not be completed.
Recovery. Check the value and reissue the command.
00508
Cause. A comma '' , '' is given after the DELETE in the DELETE SU command.
Effect. Command could not be completed.
Recovery. Check the syntax and retry the command.
00509
Cause. The CPU number given in the ALTER LINE command is invalid.
Effect. Command could not be completed.
Recovery. Specify a CPU value in range 0-15 inclusive.
00510
Cause. The user tried to alter the line to a path already being used.
Effect. Command could not be completed.
Recovery. Use the STATUS LINE <line>, DETAIL command and find out the path that
is currently being used. Provide the alternate path in the ALTER LINE command (if the
STATUS LINE shows path A, use path B and vice versa).
TR3271 00506 Invalid Value: \* for \*.
TR3271 00508 Invalid command format. Not expecting char '' , ''.
TR3271 00509 Recource CPU not configured.
TR3271 00510 Already using CPU/PATH/ADDRESS.