AM3270 and TR3271 Configuration and Management Manual

Configuring the AM3270 and TR3271 Subsystems
AM3270 and TR3271 Configuration and Management Manual—529993-001
3-4
The PTR3PROF PROFILE
The PTR3PROF PROFILE
The following profile contains a list of the device-specific modifiers that are used in the
TR3271 profile. These are the default settings supplied with the system. If you need to
make temporary changes, use SCF commands.
Configuring an AM3270 or TR3271 Line-Handler Process
To create an AM3270 or TR3271 line-handler process, you must add a PROFILE
object to the WAN subsystem. Once you define the PROFILE object in the WAN
subsystem, use the ADD DEVICE command to add the DEVICE object to the WAN
subsystem. Then use the START DEVICE command to start the line device.
Permanent Changes to the PROFILE
You can make permanent changes to the AM3270 or TR3271 line-handler processes
through the DEVICE object definition in the WAN subsystem.
-> ADD PROFILE $ZZWAN.#PTR3PROF, FILE $SYSTEM.SYS00.PTR3PROF
-> INFO PROFILE $ZZWAN.#PTR3PROF
WAN MANAGER Info profile \WILLOW.$ZZWAN.#PTR3PROF
No devices or processes are using this profile.
DEVICE SPECIFIC MODIFIERS:
DEVICES 32
LOCALPOOLPAGES 30
INTERFACELEVEL 1
OPERATIONCLASS 2
PROGRAM $SYSTEM CSS00 C0040P00
SYNCS 3
CRC16
RETRIES 3
TRANSPARENT
NOREADMODAFTERPOLL
CLEARCA
DROPRTS
NOCTRLCF
NOCONTROLRTS
TIMEOUT 270
EBCDIC
NOREADCOMMAND
NOWACKIFNOREAD
WACKDELAY 0
THRESHOLD 0
INITSTATUS 0
TESTINT 1000
CLBFRAMESIZE 500
CLBTIMEOUT 500
CLBRETRIES 3
CLBWINDOW 1
OFFLINETIMER 0
CSMLDEV 0