AM3270 and TR3271 Configuration and Management Manual

SCF Interface to AM3270 and TR3271
AM3270 and TR3271 Configuration and Management Manual—529993-001
4-13
Commands Supported by AM3270
Commands Supported by AM3270
This manual describes only those SCF commands that are supported by the AM3270
or the TR3271 subsystems. Table 4-3 shows the SCF commands supported by
AM3270. For information about commands supported by other subsystems, see the
SCF manual for the specific subsystem.
The SCF commands supported by the AM3270 subsystem are:
Detailed syntax information on the AM3270 object types and the commands that apply
to them is provided when you enter the following commands:
HELP AM3270 object-type
HELP AM3270 command
HELP AM3270 command object-type
HELP AM3270 error
The commands supported by the AM3270 subsystem and the object types to which
they apply are listed in Table 4-3.
ABORT DISCONNECT STATS
ADD INFO STATUS
ALTER LOAD STOP
BOOT NAMES SWITCH
CONNECT PRIMARY TRACE
DELETE START VERSION
Table 4-3. AM3270 Commands and Object Types
Command PROCESS LINE SU
null
ABORT X X
ADD X
ALTER X X
BOOT X
CONNECT X
DELETE X
*
X
DISCONNECT X
INFO X X
LOAD X
NAMES XXX
PRIMARY X
START X X
* You must use SUB ONLY if you delete a line; you cannot delete the line itself.