AM3270 and TR3271 Configuration and Management Manual

SCF Interface to AM3270 and TR3271
AM3270 and TR3271 Configuration and Management Manual—529993-001
4-19
Command Syntax for the ALTER Command
Command Syntax for the ALTER Command
The ALTER command has the following syntax:
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
LINE line-name | SU su-name
designates the line or subdevice whose attributes that you want to alter. If you omit
the line-name or su-name, SCF alters the attributes of the assumed line or
subdevice.
attribute-spec
is a specification of an attribute and a value to be assigned to it.
The attribute-spec for a LINE object is one of the following attribute name and
value combinations. The attributes are listed alphabetically and described in Section 6,
Attribute Descriptions for AM3270 and TR3271.
ALTER [ / OUT file-spec / ] [ LINE line-name | SU su-name ]
{ , attribute-spec }...
[ AUTOLOAD { ON | OFF } ]
[ BCCTYPE { LRC | CRC16 | CCITT } ]
[ CHARSET { EBCDIC | ASCII } ]
[ CONFIRMWRITE { ON | OFF } ]
[ CONSOLEMSG { ON | OFF } ]
[ CONTROLRTS { ON | OFF } ]
[ CONTROLSET { EBCDIC | ASCII } ]
[ DEBUG { ON | OFF } ]
[ DROPRTS { ON | OFF } ]
[ EOTIFNOREAD { ON | OFF } ]
[ NOGPAFTERWACK { ON | OFF } ]
[ PACE integer ]
[ POLLINT timestamp ]
[ POLLTYPE { GENERAL | SPECIFIC } ]
[ PROGRAM file-spec ]
[ RETRIES integer ]
[ SYNCS integer ]
[ TESTINT timestamp ]
[ THRESHOLD integer ]
[ TIMEOUT timestamp ]
[ TRANSLATE { ON | OFF } ]
[ XLATEIN ( char { , char }... ) ]
[ XLATEOUT ( char { , char }... ) ]