AM3270 and TR3271 Configuration and Management Manual

SCF Interface to AM3270 and TR3271
AM3270 and TR3271 Configuration and Management Manual—529993-001
4-33
Display for the STATS LINE Command
RESET is a sensitive option. That is, it can be specified in a STATS command only
by a user with super-group access, the owner of a subsystem, or a member of the
same group as the owner of the subsystem.
The owner of the subsystem is the user who started the subsystem or any user
whose application ID is the same as the server ID.
SUB [ ONLY | ALL | NONE ]
directs the command at a set of subordinate objects.
ONLY specifies that only the subordinate objects are affected.
ALL specifies that the named object and the subordinate objects are affected.
NONE specifies that no subordinate objects are affected.
If you omit subtype, ALL is assumed.
Display for the STATS LINE Command
The display for a LINE object has the following format:
AM3270 STATS LINE $AM3270
ResetTime....... 19 Nov 1992, 07:20:55.225
SampleTime...... 19 Nov 1992, 08:14:33.189
CLB Level:
Total Frames.... 10 BCC Error..... 2
Frame Error..... 3 No Buffers.... 0
LEVEL 2:
Messages........ 100 Sent......... 50
Received........ 50
ERRORS:
Errors.......... 3 NAKs.......... 1
BCC Error....... 3 Format Error.. 0
Retries......... 10 Short Buffer.. 1
No Buffers...... 3 Timeouts...... 2
Buffer Overrun.. 2 Line Overruns. 1
Modem........... 0 Invalid Responses 2
Misc............ 2
Number of Messages sent/received with respect to the size:
Less Than 256 Bytes Sent............ 100
Less Than 256 Bytes Received........ 10
Between 256 to 1024 Bytes Sent ..... 90
Between 256 to 1024 Bytes Received.. 10
Larger Than 1024 Bytes Sent......... 100
Larger Than 1024 Bytes Received..... 20