AM3270 and TR3271 Configuration and Management Manual

SCF Interface to AM3270 and TR3271
AM3270 and TR3271 Configuration and Management Manual—529993-001
4-34
Display for the STATS LINE Command
The statistics are described below in the order in which they appear on the screen. The
information listed in the statistics display applies only after the last RESET and/or cold
start.
ResetTime
is the date and time that the last reset operation was performed.
SampleTime
is the time at which this sample of statistics was taken.
CLB Level
Total Frames
is the number of CLB frames that were sent from and received by the AM3270
subsystem for the specified line. If this number is low, the line is inactive.
BCC Error
is the number of Block Check Character (BCC) errors that occurred at the CLB
level for the specified line.
Frame Error
is the number of frame errors that occurred at the CLB level for the specified
line.
No Buffers
is the number of times that the AM3270 subsystem could not allocate a buffer
for a request made by the specified line. A buffer failure occurs when the
AM3270 subsystem runs out of buffer space.
LEVEL 2
Messages
is the total number of messages that were sent from and received by the
AM3270 subsystem for the specified line.
Sent
is the number of messages that were sent from the AM3270 line to the
specified line.
Received
is the number of messages that were received by the AM3270 subsystem from
the specified line.