AM3270 and TR3271 Configuration and Management Manual

SCF Interface to AM3270 and TR3271
AM3270 and TR3271 Configuration and Management Manual—529993-001
4-40
Display for the STATUS LINE Command
The display for a LINE object with the DETAIL option has the following format.
Alterable attribute are preceded by an asterisk.
State
is the summary state of the LINE object.
Ldev
is the logical device number of the LINE object.
PPID
is the primary Process Identification (PID) of the LINE object.
BPID
is the backup Process Identification (PID) of the LINE object.
Path
is the primary path to the CLIP. Note that the path is undefined until the CONMgr
has defined an “activate path” or has downloaded the CLIP code.
CMG Ldev
is the logical device number of the CONMgr that controls the line.
I/O ADDR(P)
is the primary I/O address for the LINE object. The four fields displayed are CPU
number, channel number, controller number (octal), and unit number (octal).
I/O ADDR(B)
is the backup I/O address for the LINE object. The four fields displayed are CPU
number, channel number, controller number (octal), and unit number (octal).
CONMgr Name
is the name of the CONMgr process used by AM3270 to download the CLIP code.
AM3270 DETAILED STATUS LINE $AM3270
State........... STARTED Ldev............ 32
PPID............ 6,32 BPID............ 5,32
Path............ B CMG Ldev........ 17
I/O ADDR(P)..... 6,0,%35,%0 I/O ADDR(B)..... 5,0,%31,%0
CONMgr Name..... $ZZW03 Track Id........ X017HV
Preferred IP.... 192.168.114.165
Alternate IP.... 192.168.114.166
Total SU........ 2 SU Opened....... 0
*Debug........... OFF Trace........... OFF