AM3270 and TR3271 Configuration and Management Manual

SCF Interface to AM3270 and TR3271

AM3270 and TR3271 Configuration and Management Manual—529993-001

4-46

SWITCH Command

The SWITCH command causes a backup path to become the primary path and the

primary path to become the backup path. This is a sensitive command.

Considerations for the SWITCH Command

•

The SUB and SEL options are not supported.

•

For details about the different effects of the SWITCH command, refer to the SCF

Reference Manual for G-Series RVUs or the SCF Reference Manual for the

Storage Subsystem.

Command Syntax for the SWITCH Command

The SWITCH command has the following syntax:

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

LINE line-name

designates the line to be switched. If you omit line-name, SCF switches the

assumed object.

PATH { A | B | a | b }

causes the specified line or process to switch to the other path.

Example of the SWITCH Command

The following command causes the line $AM3270 to switch to PATH A:

SWITCH LINE $AM3270, PATH A

SWITCH [ / OUT file-spec / ]

[ LINE line-name ] , PATH { A | B | a | b }