AM3270 Management Programming Manual

COMMANDS AND RESPONSES
DISCONNECT Command
ZAM3-ERR-NOT-PTP-SU (5)
Your management application tried to delete a link from or to
a subdevice that is not a PTP subdevice. The subdevices that
you disconnect must both be capable of using the pass-through
protocol.
ZAM3-ERR-TARGET-OBJNAME-INV (10)
The object name for the target TR3271 subdevice does not
comply with the valid format.
ZSPI-TKN-ENDLIST indicates the end of a data list or an error
list. This token is described in "SPI Standard Definitions"
in Section 5 and the Distributed Systems Management (DSM)
Programming Manual .
Operational Notes
• DISCONNECT is a sensitive command.
• The line and subdevices must be in the STARTED summary state
when this command is issued.
• When the command is completed, the line and subdevices remain
in the STARTED summary state.
• To establish a link between an AM3270 and TR3271 subdevice,
use the CONNECT command.
6-46