AM3270 Management Programming Manual

COMMANDS AND RESPONSES
RESETSTATS Command
ZTOTAL-FRAME is the number of CLB frames that were sent
from and received by the AM3270 subsystem for the specified
line.
ZBCC-ERR is the number of BCC errors that occurred at the
CLB level for the specified line.
ZFRAME-ERR is the number of frame errors that occurred at
the CLB level for the specified line.
ZNO-BUF is the number of times the AM3270 subsystem could
not allocate a buffer for a request made by the specified
line.
ZAM3-LINE-L2 is a structure that contains information about
level 2 for the specified line. ZAM3-LINE-L2 consists of the
following fields:
ZTOTAL-MSG is the total number of messages that were sent
from and received by the AM3270 subsytem for the specified
line.
ZMSG-SENT is the number of messages that were sent from the
AM3270 subsystem to the specified line.
ZMSG-RECVED is the number of messages that were received by
the AM3270 subsystem from the specified line.
ZERR is the total number of errors that occurred at level 2
for the specified line.
ZNAK is the number of Negative Acknowlegements (NAKS) that
the AM3270 subsystem sent to the the specified line.
ZBCC-ERR is the number of BCC errors that occurred at level
2 for the specified object.
ZFRMT-ERR is the number of format errors that occurred at
level 2 for the specified line.
ZRETRY is the number of retries attempted by the AM3270
subsystem at level 2 for the specified line.
ZMSG-L256-SENT is the number of messages, which were less
than 256 bytes in length, that the AM3270 subsystem sent to
the specified line.
ZMSG-L256-RECVED is the number of messages, which were
less than 256 bytes in length, that the AM3270 subsystem
received from the specified line.
6-81