AM3270 Management Programming Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series

141

142

143

144

145

146

147

148

149

150

COMMANDS AND RESPONSES

RESETSTATS Command

ZMSG-L1024-SENT is the number of messages, which were

between 256 and 1024 bytes in length, that the AM3270

subsystem sent to the specified line.

ZMSG-L1024-RECVED is the number of messages, which were

between 256 and 1024 bytes in length, that the AM3270

subsystem received from the specified line.

ZMSG-G1024-SENT is the number of messages, which were

greater than 1024 bytes in length, that the AM3270 subsys-

tem sent to the specified line.

ZMSG-G1024-RECVED is the number of messages, which were

greater than 1024 bytes in length, that the AM3270 subsys-

tem received from the specified line.

ZAM3-MAP-RSTATS-SU is the extensible structured token that lists

the statistical counters obtained during the sample period for

the specified subdevice. It has the token number ZAM3-TNM-

RSTATS-SU and the DDL definition ZAM3-DDL-RSTATS-SU.

Each counter is defined in a separate field. The fields in the

ZAM3-MAP-RSTATS-SU token are as follows:

ZTMSTP is the time that the AM3270 subsystem read the

counters. This time indicates the end of the sample period.

ZTMSTP-LAST is the last time that the counters were reset.

This time indicates the beginning of the sample period.

ZERR is the number of errors that occurred for the specified

subdevice.

ZMSG-SENT is the number of messages that were sent from the

AM3270 subsystem to the specified subdevice.

ZMSG-RECVED is the number of messages that were received by

the AM3270 subsystem from the specified subdevice.

ZSPI-TKN-DATALIST indicates the beginning of a data list. See

"SPI Standard Definitions" in Section 5 for details.

ZCOM-TKN-OBJNAME specifies the name of the AM3270 line or

subdevice for which statistical information was requested.

Unless there is an error that prevents the RESETSTATS command

from being attempted at all, this token is present in every

response record. ZCOM-TKN-OBJNAME is described in "Data-

Communications Standard Definitions" in Section 5, "Common

Definitions," and the

Communications Management Programming

Manual

6-82