AM3270 Management Programming Manual

COMMANDS AND RESPONSES
SWITCH Command
ZCOM-ERR-CMD-INV-IN-SUMSTATE (-3)
Your management application tried to switch a process or line
while the line was in the DIAG summary state. The DIAG
summary state prevents processing of the SWITCH command for
the process or line object.
ZCOM-ERR-ALRDY-USING-RES (-1)
Your management application has tried to switch to the current
CPU or the current path. This is a warning. A ZSPI-TKN-
RETCODE of 0 is returned; however, a -1 is within the error
list.
ZSPI-TKN-ENDLIST indicates the end of a data list or an error
list. See "SPI Standard Definitions" in Section 5 for details.
Operational Notes
• SWITCH is a sensitive command.
• When the command is completed, the process and line remain in
the same summary state they were in before the command was
executed.
• The line must not be in the DIAG summary state when this
command is issued.
• Use the STATUS command to determine the current processor or
path.
6-119