AM3270 Management Programming Manual

COMMANDS AND RESPONSES
TRACE Command
ZAM3-VAL-TRACE-OPT-CLBI Trace CLB inbound frames.
ZAM3-VAL-TRACE-OPT-CLBO Trace CLB outbound frames.
ZAM3-VAL-TRACE-OPT-CLIP Enables CLIP tracing. This
bit must be set on, if one or
more bits in the 16 through
29 range are to be set.
ZAM3-VAL-TRACE-OPT-CLIPDI Trace CLIP inbound frames.
ZAM3-VAL-TRACE-OPT-CLIPDO Trace CLIP outbound frames.
ZAM3-VAL-TRACE-OPT-CLIPL2 Trace CLIP level-2 events.
ZAM3-VAL-TRACE-OPT-CLIPL3 Trace CLIP level-3 events.
ZAM3-VAL-TRACE-OPT-CLIPL4 Trace CLIP level-4 events.
ZAM3-VAL-TRACE-OPT-CLIPREQ Trace CLIP requests.
ZAM3-VAL-TRACE-OPT-CLIPCTLI Trace CLIP control input.
ZAM3-VAL-TRACE-OPT-CLIPCLTO Trace CLIP control output.
ZAM3-VAL-TRACE-OPT-ALL Sets all trace options.
Duplicate occurrences of ZCOM-TKN-TRACE-OPT are allowed.
You can select more than one option.
ZCOM-MAP-REQID and ZCOM-TKN-CMD-TIMEOUT are standard data-
communications tokens that your application can optionally
provide. These tokens are described in "Data-Communications
Standard Definitions" in Section 5 and the Communications
Management Programming Manual .
(ZSPI-TKN-) MANAGER, SSID, MAXRESP, CONTEXT, RESPONSE-TYPE,
ALLOW-TYPE, and COMMENT are standard SPI tokens. With the
exception of the ZSPI-TKN-SSID token, which your management
application must pass to SSINIT, these tokens are optional.
These tokens are described in "SPI Standard Definitions" in
Section 5 and the Distributed Systems Management (DSM)
Programming Manual .
Tokens in Response Buffer
ZSPI-TKN-SSID is an echo of the subsystem ID value provided
by your application. This token is described in "SPI Standard
Definitions" in Section 5, "Common Definitions," and the
Distributed Systems Management (DSM) Programming Manual .
6-123