AM3270 Management Programming Manual

EVENT MANAGEMENT
111: ZAM3-EVT-REPOLL-STATE
Probable Cause
A subdevice that has a non-zero SLOWPOLL interval defined has
either been placed on the repoll list or removed from the repoll
list because it is not responding to polls. The repoll interval
can be defined using the ALTER or ADD command, see Section 6,
"Commands and Responses," for a description of the ZREPOLL-INTVL
field.
The value of the SLOWPOLL state determines whether the device has
been placed onto or removed from the repoll list.
If the value of s is 0, the SLOWPOLL subdevice has been removed
from the repoll list; if the value is 1, the subdevice has been
placed onto the repoll list. By placing the subdevice onto the
repoll list it gives a subdevice that typically responds more
slowly a longer period of time to respond without timing out.
Recommended Action
If the event message persists, disable message 111.
7-36