AM3270 Management Programming Manual

EVENT MANAGEMENT
160: ZAM3-EVT-CSS-LIU-CONFIG-ERR
ZAM3-TKN-CLIP-FUNC is the CLIP function and modifier. It
corresponds to the value param1 in the message text.
Volatile Tokens
ZEMS-TKN-CU is a standard EMS token that contains the controller
and unit number. This token is present in the event buffer only
if the controller uses subchannel-type I/O addressing.
Event-Message Text
In the message text, ldev corresponds to the value of ZEMS-
TKN-LDEV, n,n,%nn,%nnn corresponds to the value of ZEMS-MAP-
EXIOADDR, ldevname corresponds to the value ZEMS-TKN-LDEVNAME,
path corresponds to the value ZCOM-TKN-NEW-PATH, config-err
corresponds to the value ZAM3-TKN-CONFIG-ERR, param1 corresponds
to the value ZAM3-TKN-CLIP-FUNC.
Probable Cause
The CLIP of the 6100 CSS received a line configuration different
from that in the I/O process. The line does not come up. If
the value of config-err is 0, a bad configuration was sent to the
CLIP; if the value is 1 there was an unexpected CLIP response.
The value of param1 indicates the CLIP function and modifier.
Recommended Action
Note the values of config-err and param1 in the message text, and
contact your Tandem representative.
7-53