AM3270 Management Programming Manual

MANAGEMENT PROGRAMMING FOR AM3270
Event Messages
Table 2-3. CMI Commands and Programmatic Commands (Page 3 of 3)
CMI COMMAND PROGRAMMATIC COMMAND
AND OBJECT TYPE AND OBJECT TYPE
STATUS LINE, ZCOM-CMD-STATISTICS ZCOM-OBJ-LINE
DETAIL
STATUS SU, ZCOM-CMD-STATISTICS ZCOM-OBJ-SU
DETAIL
STATUS LINE, ZCOM-CMD-RESETSTATS ZCOM-OBJ-LINE
RESET
STATUS SU, ZCOM-CMD-RESETSTATS ZCOM-OBJ-SU
RESET
STOP LINE ZCOM-CMD-STOP ZCOM-OBJ-LINE
STOP SU ZCOM-CMD-STOP ZCOM-OBJ-SU
TRACE LINE ZCOM-CMD-TRACE ZCOM-OBJ-LINE
For detailed descriptions of the CMI commands, refer to the
Communications Management Interface (CMI) Operator’s Guide .
EVENT MESSAGES
An event message describes an event that has occurred in a
subsystem, such as a hardware error or a software error. All
event messages are in SPI message format.
All event messages issued by the AM3270 subsystem are sent to
the EMS collector process ($0). These event messages are then
placed into the user-specified log files. Once placed into the
log files, the consumer distributor process can read the event
messages and retrieve the selected events for the management
application. The management application retrieves event messages
by sending commands in SPI message format to an EMS consumer
distributor.
2-10