ASAP 1.1 Hybrid Manual

HP NonStop ASAP Hybrid Manual – 529729-004
Page 2-2
SET PROXY ON
3. If the Hybrid object files described in Step 1 were not installed to
$SYSTEM.SYSTEM, also add this line to the ASAPCONF file:
SET PROXYOBJECT $<vol>.<subvol>.ASAPPXY
where $<vol>.<subvol> specifies the volume and subvolume where the ASAP
Hybrid object files were placed in Step 1.
4. Create a new configuration file for the ASAP Proxy SGP to define the
characteristics of the overall Hybrid environment. By default, this file should
be named ASAPPCNF and should be located in $SYSTEM.SYSTEM. If the file
has a different name or is located in a subvolume other than
$SYSTEM.SYSTEM, add this line to the ASAPCONF file:
SET PROXYCONFIG $<vol>.<subvol>.<filename>
where $<vol>.<subvol>.<filename> references the fully qualified name of the
configuration file you just created.
For detailed information on the contents of the Proxy SGP configuration file,
see Configuring the Proxy SGP.
5. Create a new configuration file for each Hybrid Gateway you defined in the
Proxy SGP configuration file created in Step 4. For detailed information on
the contents of the Gateway configuration files, see Configuring Hybrid
Gateways.
6. Restart ASAP, and ensure that no configuration error messages are written to
the EMS event log while ASAP Hybrid processes its configuration files during
startup.