ASAP 1.1 Hybrid Manual

HP NonStop ASAP Hybrid Manual – 529729-004
Page 3-11
FileName
Description: The name of the server log file. If logging is enabled, log
records are written to this file, in HTML format. If you change this value, be
sure to fully qualify the file name. The ASAP Hybrid for Linux server
changes its default directory to the root directory at startup. Therefore,
specifying a file name only, without path information, causes the log file to
be created in the system’s root directory, which might not be desirable.
Value Range: A valid Linux file name
Default Value: asaplog.html, located in the server program directory
Example: FileName = /var/asap/asaplog1.html
Level
Description: The logging detail level for the server. Level = 4 causes all
error, warning, and informational messages to be logged. Level = 3 causes
all error and warning messages to be logged. Level = 2 causes all error
messages to be logged. Level = 1 causes only critical error messages to be
logged. The default value of 3 should be used under normal circumstances.
Value Range: 1 through 4
Default Value: 3 (All error and warning messages are logged.)
Example: Level = 4
Server Options
Server configuration options are contained in the Server section of the
configuration file. These options control the behavior of the core portions
of the ASAP Hybrid for Linux server, including how often the server sends
sample data to NonStop ASAP, how many domains can be monitored on
the Linux system, and whether or not HTML domain reports are produced
every sample interval. Each option is described in detail below.