ASAP 2.8 Client Manual

Installing ASAP

HP NonStop ASAP Client Manual—425263-004

2-2

Installing Monitoring Components

For a detailed description of how to install ASAP host components on local and remote

NonStop servers, see the ASAP Server Manual and the ASAP Extension Manual.

To install ASAP Server on the host:

1. Upload the ASAP Server files from the ASAP Server CD.

2. TACL 1 > LOGON network-group.userid

3. TACL 2 > VOLUME $ASAP-ISV-Volume.ZASAP

4. TACL 3 > OBEY INSTALL

5. Follow the directions for “Full Install on this node” in the online help.

6. Follow the directions for “Remote Monitor Install” in the online help.

7. When ASAP host installation is complete, start the ASAP subsystem by using the

ASAP command interpreter START COLLECT and START MONITOR commands.

For example:

TACL 1 > ASAP

+ START COLLECT

+ START \CHICAGO

+ START \NEWYORK

+ START \SANFRAN

Installing the SSG

For a detailed description of how to install the SSG on NonStop servers, see the

SeeView Server Gateway (SSG) Manual.

For D43 and later, the SSG is normally already installed on NonStop systems. If SSG

is already installed, you do not need to reinstall it.

To see if the SSG is installed on your local host node:

> SSGCOM

If START or STATUS are available from within SSGCOM, the SSG command

interpreter, the SSG is installed on your system.

If SSG is not installed on your system, you need to perform a SSG Local Node Install

before you can use ASAP. ASAP does not require Remote Server Call (RSC), so you

do not need to install RSC before using ASAP.

To install the SSG on your local node:

1. TACL 1 > LOGON network-group.userid