ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-86
Recovery. The FILEINFO system call returned this error. For corrective action for the
specified error code, see the Operator Messages Manual, or the Guardian Procedure
Errors and Messages Manual.
Retry your operation, but this time pause between commands. For example, the
system cannot process a shutdown command immediately after a startup command;
the system needs a momentary pause.
2019
err
is the file-system error number associated with the last operation on the file
count
is the length of the message, in bytes
buf
is the first word of the received request message
pid
is the requester’s process ID
Cause. The system could not reply to a message it received from a READUPDATE(X)
call on the $RECEIVE file.
Effect. The system did not reply to the message.
Recovery. The FILEINFO system call returned this error. For corrective action for the
specified error code, see the Operator Messages Manual, or the Guardian Procedure
Errors and Messages Manual.
If the problem persists, contact your HP representative.
2020
count
is the count of rename message notifications that are currently pending.
Cause. ASAPCOL data base collecor identified that there are too many running ASAP
command interpresters and seconday ASAPCOL collectors. Since there are too many
of these, not all of them can be notified, and ASAPCOL logs this error message.
$RECEIVE reply failed, FE: err, count, buf, pid
DB Rename notify table full count