ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-96
Recovery. Make sure the checkpoint information is correct. Check that the CPU is up
and running. If the CPU is down, follow the recommended recovery procedure for a
CPU failure.
3001
cpu
is the CPU number
Cause. The primary process created a backup process in the CPU indicated in the
message.
Effect. The backup process was created successfully.
Recovery. This message is informational only. No corrective action is required.
3002
pid
is a four-word array where NEWPROCESS returns the process ID of the
requester’s new process
err
is a status word of the form:
Cause. The primary process could not send checkpoint information to its backup
process.
NonStop Backup Created Cpu: cpu
Unable to checkpoint startup err 0:7, err 8:15, pid
err 0:7 = 0 no error
err 0:7 = 1 no backup or cannot communicate with
backup, then 8:15 = file-system error
number
err 0:7 = 2 takeover from primary, then
8:15 = 0 - primary stopped
= 1 - primary ended abnormally
= 2 - primary’s process failed
= 3 - primary called
CHECKSWITCH
err 0:7 = 3 invalid parameter, then 8:15 = number of
parameter in error