ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-119
4496
Cause. An error occurred when trying to load the tape domain names to be monitored
(see message 4402 on page 1-112). This message indicates that the last list of
domains is used instead.
Effect. None.
Recovery. Informational message. See recovery for message 4402 on page 1-112.
4497
num
maximum number of tape domain entries allowed in the Tape SGP
Cause. The maximum number of tape domains to be monitored was reached.
Effect. The overflow tape domains are not monitored.
Recovery. Monitor fewer tape domains. If this becomes an issue, contact your support
representative and provide your requirements.
4498
Cause. No tape domains are specified in the objective database, so the Tape SGP
autoconfigured to monitor all tape devices found on the system.
Effect. None.
Recovery. Informational message; no corrective action is necessary.
4499
xxxx
is the number of times the error occurred
Cause. The error number was suppressed.
Effect. The error number suppressed had occurred xxxx times.
Recovery. None.
TAP Reloading previous configuration.
TAP Could not load all domains: maximum of num reached.
TAP Autoconfiguration completed.
ASAP ASAP Error #.... occurred xxxx time(s)