ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-141
4744
ldev
is the logical device number.
ctrl
is the controller for D-Series RVUs, or the module for G-Series RVUs.
Cause. The Communication SGP could not access the device.
Effect. ASAPCMM cannot collect Communication line counters. Communication line
status information is valid when ASAPCMM cannot obtain the communication
counters.
Recovery. Contact your HP representative to file an HP Product Case.
4747
err
is the Measure error number.
Cause. ASAPCMM could not stop its measurement. err represents the Measure
error returned from the Measure subsystem.
Effect. ASAPCMM could not stop the measurement named ZCMM xxx, where xxx is
the ASAP ID.
Recovery. Stop and delete the measurement named ZCMMP xxx, where xxx is the
ASAP ID. Use the Measure interface MEASCOM.
4748
Cause. The ASAPMON process stopped the ASAPCMM process.
Effect. ASAPCMM stops its measurement.
Recovery. This message is informational only. No corrective action is required.
ASAPCMM Comm device inaccessible ldev ctrl
ASAPCMM unable to stop Comm Measurement. err
ASAPCMM Comm Measurement stopped