ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004

1-1

ASAP and ASAP Extension Error

Messages

This section describes the ASAP and ASAP Extension error messages:

ASAP Error Message Summary

Table 1-1 shows Monitor messages logged to EMS and ASAPLOG. Basic text

messages of this format are always logged to the ASAPLOG file. In addition, these

same messages are logged to EMS. If the SET EVENTS option is set to NOEMS, a

non-tokenized, simple text message is logged. If the SET EVENTS option is OFF, ON,

INFORMATIVE, or CRITICAL, a tokenized EMS event message is generated.

Topic Page

ASAP Error Message Summary

1-1

ASAP Error Messages 1-15

Table 1-1. Monitor Messages Logged to EMS and ASAPLOG (page1of4)

Message

Number Monitor Messages Parameters

1000 SGP Open pid error: err

1001 MONITOR -> COLLECT, error: err

1002 Send to SGP pid error: err, type,

read^L

1003 Send to COLLECT error: err

1004 Bad SGP stat^sum reply type, words

1005 Sync, COLLECT I/O error: err

1006 Sync, delay too long err

1007 Sync, msg too short: iol

1008 Sync, not required: delta

1009 Sync, Clock Corrected: delta

1010 Sync, Can't Set Clock: delta

1011 Short request received count, buf, pid

1012 Received shutdown request pid

1013 Illegal request received buf, count, pid

1014 startup msg error message charoffset

1015 Startup Can't Open TERM