ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
2-63
ZASP-TKN-ASAP-ERRORNUM is “1303”.
1304: ZASP-EVT-DELTA-TOO-BIG
pin#
is the process identification number.
dpt1
is the third word of the process delta time for this PIN.
dpt2
is the last word of the process delta time for this PIN.
Cause. ASAP detected a 100-percent process control block (PCB) busy state,
possibly because of an internal interface failure with the operating system.
Effect. The PCB busy information is suspect.
Recovery. If the problem persists, contact your HP support representative and provide
all relevant information:
•
Descriptions of the problem and accompanying symptoms
•
Details from the messages generated
•
System number
•
Numbers and versions of all related products
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and a CPU dump, if applicable
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is “1304”.
1305: ZASP-EVT-PROC-TIMES
pin#
is the process identification number.
ProcessTime delta too big:last 2 INTs in .1 sec: pin#, dpt1,
dpt2
Pin:This_ProcessTime:Last_ProcessTime in 10 sec: pin#, pt1,
pt2