ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
2-64
pt1
is the total process time of this PIN at the current sample time.
pt2
is the total process time of this PIN at the last sample time.
Cause. ASAP detected a 100-percent process control block (PCB) busy state,
possibly due to an internal interface failure with the operating system.
Effect. The PCB busy information in the sample might be distorted.
Recovery. If the problem persists, contact your HP support representative and provide
all relevant information:
•
Descriptions of the problem and accompanying symptoms
•
Details from the messages generated
•
System number
•
Numbers and versions of all related products
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and a CPU dump, if applicable
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is “1305”.
1306: ZASP-EVT-ALIVE-BUT-NO-PCB
pin#
is the process identification number.
pri
is the process priority.
pt2
is the total process time of this PIN at the last sample time.
Cause. The process was alive, but statistics were not returned, possibly due to an
internal operating system error.
Effect. The process control block (PCB) busy information in the sample might be
distorted.
Pin:Alive but No PCB:priority:Last_PTime in .1 sec: pin#,
pri, pt2