ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
2-74
ZASP-TKN-ASAP-ERRORNUM is “1703”.
1704: ZASP-EVT-DSK-BAD-VOLUME-SUBVOL
Cause. The Measure subsystem has a measurement data file with the same name as
ZASPxxx, where xxx is the ASAP ID. The Disk Statistics Gathering process (SGP)
could not delete it.
Effect. ASAPDSK cannot obtain disk counters.
Recovery. Use the ASAP Conversational Interface (CI) to set ASAPDSK with a
different volume or subvolume than previously specified. If you used the default, try a
volume other than $SYSTEM.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is “1704”.
1705: ZASP-EVT-DSK-MEASFH-TRAPPED
err
is the Measure error returned from the Measure subsystem.
Cause. The MEASFH process trapped out.
Effect. ASAPDSK cannot obtain disk counters.
Recovery. Specify a different CPU for the MEASFH process by using the ASAP
Conversational Interface (CI) to specify CPU cpu-number in the SET DISK command.
Then restart the ASAP Monitor.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is “1705”.
1706: ZASP-EVT-DSK-MEAS-INCOMPATIBLE
err
is the Measure error returned from the Measure subsystem.
Set Disk param VOLUME/SUBVOL to another location
ASAPDSK MEASFH Trapped err
ASAPDSK Incompatible Measfh Release err