ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
2-75
Cause. An incompatible MEASFH release was found on $System.sysxx.
Effect. ASAPDSK cannot obtain disk counters.
Recovery. Install the correct MEASFH release on $System.sysxx and restart the
ASAP Monitor.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is “1706”.
1707: ZASP-EVT-DSK-MEASFH-SEG-ERROR
err
is the Measure error returned from the Measure subsystem.
Cause. The MEASFH process was not able to obtain the extended segment size in
the CPU.
Effect. ASAPDSK cannot obtain disk counters.
Recovery. Specify a different CPU for the MEASFH process by using the ASAP
Conversational Interface (CI) to specify CPU cpu-number in the SET DISK command.
Then restart the ASAP Monitor.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is “1707”.
1708: ZASP-EVT-DSK-DATA-FILE-INUSE
err
is the Measure error returned from the Measure subsystem.
Cause. ASAPDSK could not create a Measure data file.
Effect. ASAPDSK cannot obtain disk counters.
Recovery. Stop and delete the measurement named ZASPxxx, where xxx is the
ASAP ID. Use the Measure interface MEASCOM.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ASAPDSK Measfh Ext Seg Error err
ASAPDSK Measure Data File In Use err