ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
2-84
Recovery. Stop and delete the measurement named ZASPxxx, where xxx is the
ASAP ID. Use the Measure interface MEASCOM.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is “1747”.
1748: ZASP-EVT-DSK-SHUTDWN-COMPLETE
Cause. ASAPDSK was stopped by the ASAPMON process.
Effect. ASAPDSK stops its measurement.
Recovery. Informational message only; no corrective action is needed.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is “1748”.
1749: ZASP-EVT-DSK-SHUTDWN-COMPLETE
err
is the Measure error returned from the Measure subsystem.
Cause. ASAPDSK has an interface problem with the Measure subsystem.
Effect. ASAPDSK could not obtain disk counters during a sample interval. Disk
statistics are set to null for the sample interval when ASAPDSK could not obtain DP2
counters.
Recovery. Check the ASAP log for previous ASAPDSK messages and make the
appropriate corrections. For corrective action for the specified error, see the Measure
Reference Manual. If the problem persists, contact your HP representative.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is “1749”.
ASAPDSK Disk Measurement stopped
ASAPDSK Unexpected Error err