ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
2-173
Cause. ASAPCMM could not restart its measurement.
Effect. ASAPCMM could not obtain disk counters during a sample interval. Comm
statistics are set to null for the sample interval when ASAPCMM could not obtain the
COMM IOP counters.
Recovery. Check the ASAP log for previous ASAPCMM messages and make the
necessary corrections. For corrective action for the specified error, see the Measure
Reference Manual.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is "4743".
4744: ZASP-EVT-CMM-DEVICE-INACCESSBL
ldev
is the logical number of the device.
ctrl
is the D-Series controller number, or the G-Series module.
Cause. The Comm Statistics Gathering process (SGP) could not access the device.
Effect. ASAPCMM could not collect comm line counters. Comm line status information
is still valid even when ASAPCMM cannot obtain the comm line counters.
Recovery. Contact your HP representative to file an HP Product Case.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is "4744".
4747: ZASP-EVT-CMM-SHUTDWN-INCMPLETE
err
is the Measure error returned from the Measure subsystem.
Cause. ASAPCMM could not stop its measurement.
Effect. ASAPCMM could not stop the measurement named ZCMMxxx, where xxx is
the ASAP ID.
ASAPCMM Comm line inaccessible ldev,ctrl
ASAPCMM unable to stop Disk Measurement err