ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-35
1220
err
is the file-system error number associated with the last operation on the file.
Cause. The Expand SGP could not create a Subsystem Manager.
Effect. ASAP and the subsystem cannot communicate.
Recovery. The FILEINFO system call returned this error. For corrective action for the
specified error code, see the Operator Messages Manual or the Guardian Procedure
Errors and Messages Manual.
Check that the NonStop Kernel Subsystem Manager is secured properly. If the problem
persists, contact your HP representative.
1230
err
is the file-system error number associated with the last operation on the file.
Cause. A Subsystem Manager does not exist.
Effect. ASAP and the subsystem cannot communicate.
Recovery. The FILEINFO system call returned this error. For corrective action for the
specified error code, see the Operator Messages Manual or the Guardian Procedure
Errors and Messages Manual.
Check that the Expand Manager is up and running. Retry the request. If the problem
persists, contact your HP representative.
1231
err
is one of these SPI error numbers:
Can't create Subsystem Mgr ($ZEXP), Error: err
Can't Open Subsystem Mgr ($ZEXP), Error: err
Can’t Build SPI Request, Error: err
0 Indicates there is no error
-1 Indicates an invalid buffer format
-2 Indicates an invalid parameter value
-3 Indicates a missing parameter