ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-42
Ldev
is the logical device number of the device of the Expand line.
Cause. The Expand SGP could not obtain ATM statistics for a Expand line using ATM
as the transport.
Effect. ASAP could not obtain path statistics from the Expand manager.
Recovery. HP uses this error message for problem isolation. Contact your HP
representative.
1250
param
contains the parameter that caused the problem.
Cause. ASAPEXP detected that an invalid parameter was specified in the ASAP
Conversational Interface (CI) SET EXPAND ON, PARAMETER command.
Effect. ASAPEXP uses the default values for all parameters.
Recovery. Ensure that all parameters contained in the ASAP startup file ASAPCONF
are valid; then restart the ASAP Monitor.
1251
error-text
is error text returned from Ecb_loadentities_ procedure.
Cause. The ASAP ecb_loadentities_ procedure returned the specified error when
trying to load the Expand entity.
Effect. The Expand entity does not load EDL records.
Recovery. This error might be caused by the EDL settings. For more information on
ASAP EDL, see the ASAP Client Manual.
1253
err
is the error number returned from the Readdomain procedure.
Error SET EXPAND PARAM param
ASAPEXP ECB_Load Error error-text
ReadDomain Error: err