ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-46
pin#
is the PIN number of the process.
Cause. The system could not obtain the program file name of the process. This is a
result of a process going away between a GETPEEKPCBs call and a PROCESSINFO
call.
Effect. The process information does not include a related program file name.
Recovery. This message is informational only. No corrective action is required.
1302
err
is the outcome of a PROCESSINFO call.
pin#
is the PIN number of the process:
Cause. The system could not obtain the device name of the process. The process
probably went away before the device name was obtained.
Effect. The process information does not include a related device name.
Recovery. This message is informational only. No corrective action is required.
0 Indicates the status of the process CPU, PIN returns.
1 Indicates the process CPU, PIN does not exist or does not match the specified
criteria. The status for the next higher CPU, PIN in the specified processor is
returned. The four-word process ID for which status is being returned reflects the
process ID parameters, if present.
2 Indicates the process CPU, PIN does not exist, and no higher CPU, PIN exists in the
process that matches the specified criteria.
3 Indicates the process cannot communicate with the CPU.
4 Indicates the CPU is not present.
5 Indicates that the system specified by sysnum could not be accessed.
99 Indicates a parameter error.
Unable to get device name: err, pin#
0 Indicates no error
100 Indicates the device is not ready or the controller is not
operational