ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-47
1303
pin#
is the PIN of the process.
dpt
is the delta of the process time for this PIN.
dst
is the delta of the sample time for this PIN.
Cause. ASAP detected a 100 percent PCB busy, possibly because of a NonStop
operating system internal interface failure.
Effect. The PCB busy information is suspect.
Recovery. If the problem persists, contact your HP representative.
1304
pin#
is the PIN of the process.
dpt1
is the third word of the delta time for this PIN.
dpt2
is the last word of the process delta for this PIN.
Cause. ASAP detected a 100 percent PCB busy, possibly because of a NonStop
operating system internal interface failure.
Effect. The PCB busy information is suspect.
Recovery. If the problem persists, contact your HP representative.
pin:ProcessTime delta:Sampletime delta in .1 sec: pin#, dpt,
dst
ProcessTime delta too big:last 2 INTs in .1 sec: pin#, dpt1,
dpt2