ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-48
1305
pin#
is the PIN number of the process.
pt1
is the total process time of this PIN at the current sample time.
pt2
is the total process time of this PIN at the last sample time.
Cause. ASAP detected a 100 percent PCB busy, possibly because of an internal
NonStop operating system interface failure.
Effect. The PCB busy information in the sample might be distorted.
Recovery. If the problem persists, contact your HP representative.
1306
pin#
is the PIN number of the process.
pri
is the process priority.
pt2
is the total process time of this PIN at the last sample time.
Cause. The process was alive but statistics were not returned, possibly because of an
internal NonStop operating system error.
Effect. The PCB busy information in the sample might be distorted.
Recovery. If the problem persists, contact your HP representative.
Pin:This_ProcessTime:Last_ProcessTime in 10 sec: pin#, pt1,
pt2
Pin:Alive but No PCB:priority:Last_PTime in .1 sec: pin#, pri,
pt2