ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-49
1307
pin#
represents the PIN number of the process.
which
represents:
Cause. The process specified is not in the internal sample array. This is an internal
error.
Effect. PCB information cannot be returned.
Recovery. If the problem persists, contact your HP representative.
1308
Cause. Internal ASAP algorithms are detecting bad subsampling.
Effect. Subsample data is not being reported for this sample interval, or the
PCBSTATS data is inaccurate during this sample interval.
Recovery. The Monitor is designed to readjust itself and recover. However, if the
problem persists, contact your HP representative.
1309
err
indicates the outcome of a PROCESSINFO system call and returns one of:
Process Not in the Sample Data: pin#, which
0 Current sample
array
1 Previous array
bad SMON Subsampling
Unable to collect PCB statistics, error: err
0 Returns the status for process CPU, PIN.
1 Indicates the process CPU, PIN does not exist or does not match the specified
criteria. The Monitor returns the status for the next higher CPU, PIN in the specified
processor. The four-word process ID of the process for which the status is being
returned includes the process ID parameters, if they are present.
2 Indicates the process CPU, PIN does not exist, and no higher CPU, PIN in the
specified process that matches the specified criteria exists.