ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-54
1701
err
is the Measure error returned from the Measure subsystem
Cause. Measure subsystem access is for the super-user group only.
Effect. ASAPDSK cannot obtain disk counters. Disk device status information is valid
when ASAPDSK cannot obtain the disk counters.
Recovery. Check the following and change the security to NUNU:
$system.sysxx.measctl; $system.sysxx.measfh; $system.sysxx.measmon.
1702
err
is the Measure error returned from the Measure subsystem
Cause. The Measure subsystem returned a negative reply to the Measopen
procedure.
Effect. ASAPDSK cannot obtain disk counters. Disk device status information is valid
when ASAPDSK cannot obtain the disk counters.
Recovery. ASAPDSK will reopen Measure during the next sample period. If the error
persists, stop the Measure subsystem. If the object file (ASAPDSK) is owned by the
super-user group, the disk SGP process will restart the Measure subsystem during the
next sample period. If the problem persists, contact your HP representative.
1703
err
is the Measure error returned from the Measure subsystem
Cause. The Measure subsystem has a measurement data file with the same name as
ZASPxxx, where xxx is the ASAP ID. The DISK SGP could not delete it.
Effect. ASAPDSK cannot obtain disk counters. Disk device status information is valid
when ASAPDSK cannot obtain the disk counters.
Recovery. Close the file through MEASCOM. The disk SGP will attempt to start the
measurement during the next sample period. You can also use the ASAP
ASAPDSK Measure Access Denied, not Super err
ASAPDSK Measure Allocate Segment Error err
ASAPDSK ASAPmeas file in use err