ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-56
Recovery. Install the correct MEASFH release on $SYSTEM.SYSxx and restart the
ASAP Monitor.
1707
err
is the Measure error returned from the Measure subsystem
Cause. The MEASFH process was not able to obtain the extended segment size in
the CPU.
Effect. ASAPDSK cannot obtain disk counters. Disk device status information is valid
when ASAPDSK cannot obtain the disk counters.
Recovery. Specify a different CPU for the MEASFH process by using the ASAP
Conversational Interface (CI) to specify CPU cpu-number in the SET DISK command.
Next, restart the ASAP Monitor.
1708
err
is the Measure error returned from the Measure subsystem
Cause. ASAPDSK could not create a Measure data file.
Effect. ASAPDSK cannot obtain disk counters. Disk device status information is valid
when ASAPDSK cannot obtain the disk counters.
Recovery. Stop and delete the measurement named ZASPxxx, where xxx is the
ASAP ID. Use the Measure interface MEASCOM.
1709
err
is the Measure error returned from the Measure subsystem
Cause. ASAPDSK could not start a measurement. Maximum measurements were
reached.
Effect. ASAPDSK cannot obtain disk counters. Disk device status information is valid
when ASAPDSK cannot obtain the disk counters.
ASAPDSK Measfh Ext Seg Error err
ASAPDSK Measure Data File In Use err
ASAPDSK 64 Measurements Configured err