ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-57
Recovery. If possible, stop and delete unnecessary measurements. Restart the ASAP
Monitor once the Measure subsystem has fewer than 64 measurements configured.
1710
err
is the Measure error returned from the Measure subsystem
Cause. ASAPDSK could not start a measurement. The pool space is full for code
range addresses in the MEASCTL process.
Effect. ASAPDSK cannot obtain disk counters. Disk device status information is valid
when ASAPDSK cannot obtain the disk counters.
Recovery. If possible, stop and delete unnecessary measurements. Restart the ASAP
Monitor once the Measure subsystem has fewer than 64 measurements configured.
1711
err
is the Measure error returned from the Measure subsystem
Cause. ASAPDSK could not start a measurement in the specified CPU or in the
default CPU (CPU 0).
Effect. ASAPDSK cannot obtain disk counters. Disk device status information is valid
when ASAPDSK cannot obtain the disk counters.
Recovery. Specify a different CPU for the MEASFH process by using the ASAP
Conversational Interface (CI) to specify CPU cpu-number in the SET DISK command.
Next, restart the ASAP Monitor. An example of the CI command is:
SET DISK ON, PARAM "CPU 3"
1712
err
is the Measure error returned from the Measure subsystem
Cause. ASAPDSK could not start a measurement because the MEASCTL process
reached its maximum resources.
ASAPDSK Measctl Pool Space Error err
ASAPDSK Measure CPU Memory error err
ASAPDSK Measctl Resources Exceeded err