ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-58
Effect. ASAPDSK cannot obtain disk counters. Disk device status information is valid
when ASAPDSK cannot obtain the disk counters.
Recovery. If possible, stop and delete unnecessary measurements. Restart the ASAP
Monitor once the Measure subsystem has fewer than 64 measurements configured.
1713
err
is the Measure error returned from the Measure subsystem
Cause. ASAPDSK could not start a measurement because the MEASCTL process
reaches its maximum internal counter space.
Effect. ASAPDSK cannot obtain disk counters. Disk device status information is valid
when ASAPDSK cannot obtain the disk counters.
Recovery. If possible, stop and delete unnecessary measurements. Restart the ASAP
Monitor once the Measure subsystem has fewer than 64 measurements configured.
1715
cpu
is the CPU number selected
Cause. The Disk SGP could not start a measurement in the specified CPU.
Effect. ASAPDSK starts the measurement in the CPU where the ASAPDSK process
is running.
Recovery. Informational message only; no corrective action is needed.
1720
Cause. ASAPDSK started a measurement successfully.
Effect. ASAPDSK is operating.
Recovery. Informational message only; no corrective action is needed.
ASAPDSK Measctl Counter Allocation error err
ASAPDSK Error SET DISK PARAM CPU nn cpu
ASAPDSK ZASAPXXX started. (XXX is the configured ASAP ID)