ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-59
1721
Cause. ASAPDSK could not start a measurement.
Effect. ASAPDSK cannot obtain disk counters. Disk device status information is valid
when ASAPDSK cannot obtain the disk counters.
Recovery. Check for previous ASAP log messages from ASAPDSK and make
appropriate corrections.
1722
err
is the Measure error returned from the Measure subsystem
Cause. ASAPDSK restarted the measurement.
Effect. ASAPDSK could not obtain disk counters during a sample interval. Possibly
the Measure subsystem was stopped and restarted. Disk statistics are set to null for
the sample interval when ASAPDSK cannot obtain DP2 counters.
Recovery. Informational message only; no corrective action is needed.
1723
cpu
is the CPU number
Cause. The Disk SGP started the Measctl process in a CPU that did not have the
measctl process running.
Effect. ASAPDSK starts Measctl in the CPU.
Recovery. Informational message only; no corrective action is needed.
1730
param
is the invalid parameter
ASAPDSK ZASAPXXX NOT started. (XXX is the configured ASAP ID)
ASAPDSK restarted err
ASAPDSK started Measctl in CPU nn cpu
Error SET DISK PARAM param