ASAP 2.8 Messages Manual

HP NonStop ASAP Messages Manual—429917-004
1-76
fname
is the name of the file in error
Cause. The ASAPX SGP received an unsupported record type from one of the
ASAPXMON processes. There is a corrupted reply buffer or a version mismatch
between ASAPXSGP and ASAPXMON.
Effect. ASAPX might not report data for all domains.
Recovery. Make sure ASAPXSGP and ASAPXMON are the same version. Watch the
problem for at least three intervals to see if it persists. If it does, contact HP Support for
assistance.
1835
domain
is the name of the first domain that failed aggregation.
max
is the maximum number of allowed aggregate domains in the processor.
Cause. The maximum number of aggregate domains already exist in the processor.
Effect. ASAPX cannot aggregate any more domains in the processor.
Recovery. Modify the SET AGGREGATE statements in ASAPXCNF to product fewer
aggregate domains, register application domains in another processor, or use the SET
MAXAGGREGATES command in the ASAPXCNF file to increase the number of
allowed aggregate domains.
1860
Cause. ASAPX found non-SET commands in the ASAPXCNF file fname.
Effect. None. ASAPX ignores the command.
Recovery. ASAPX ignores all non-SET commands in the ASAPXCNF file. To
eliminate this warning message, remove the non-SET commands from the file.
Aggregation rejected, max aggregates: domain, Max: max
Non-SET commands not executed: fname