ASAP 2.8 Server Manual

File and Process Monitoring
HP NonStop ASAP Server Manual—522303-007
5-9
Default Process MetricRule Settings
behavior can be turned on with the RUL aggregate control and results in this priority
ranking of the possible values, from low to high:
As an example, when RUL is specified, a process in the Stopping process state is
considered to be worse than a process in the Runnable process state, so the Stopping
value is propagated to the aggregate record based on the priority rule. Like other
attributes, the worst associated state value is always propagated to the aggregate
level.
Default Process MetricRule Settings
This table shows the MetricRule aggregate controls that are set for Process monitoring
when you first install ASAP. Any other Process attributes have no default setting and
are state propagated:
PState WState
UnAlloc None
Starting Lreq
Runnable Lpipe
DebugBrk Pon
DebugTrp Iopon
DebugReq Intr
InspMBrk Lcan
InspBrk Ldone
InspTrp Ltmf
InspReq Linsp
SaveAben
Stopping
XIOInit
Attribute Default Value
Pri MIN
Busy SUM
PState RUL
WState RUL
Mpages SUM
Msent SUM
MRecv SUM