ASAP 2.8 Server Manual

ASAP Conversational Interface Commands
HP NonStop ASAP Server Manual—522303-007
6-9
APP Command
CPU cpu-number
specifies that the performance information for the APP domains executing in the
specified CPU, cpu-number, are displayed. If you do not specify a CPU, statistics
for all APPs in the current system are displayed.
STATES
displays the associated OEM state for each attribute where StatePair is true.
These OEM states are reported, depending on the type of ranking used (see SET
OBJECTIVESRANK on 6-104):
TIME hh:mm m/d/y
defines the ending time of the display information in hours, minutes, month, day,
and year. For example, specifying TIME 10:15 when RATE is 5 indicates that
statistics collected from 10:10 to 10:15 are displayed.
hh
is the hour.
mm
is the minute.
m/d/y
is the month, day, and year. Valid m/d/y entries are mm/dd/yy, yyyy/mm/dd,
or mm/dd/yyyy.
AGGREGATE
specifies that aggregate records be output along with the detail records.
AGGREGATE is on by default.
Existence 1 Object exists.
Up or OK 2 Object is up or meets objectives.
Low 3 Object utilization is low.
Medium 4 Object utilization is medium.
High 5 Object utilization is high.
Warning 6 Object is at Warning level.
Critical 7 Object is at Critical level.
Down 8 Object is down or not operational.