ASAP 2.8 Server Manual

ASAP Conversational Interface Commands
HP NonStop ASAP Server Manual—522303-007
6-17
COMM Command
LDEV
displays the logical device number of the communication line.
PIN
displays the process identification number of the primary process.
TYPE
displays the device type and the subtype of the communication line.
D.xx NonStop OS displays the following:
CTRL
displays the controller address (in Octal) that the device was using.
UNIT
displays the unit number of the communication line.
CH
displays the channel that the communication line was using.
PROGRAM
displays the communication lines object file name.
G.xx NonStop OS displays the following:
GRP
displays the group number that the device was using.
MOD
displays the module number of the communication line.
SLOT
displays the slot number of the communication line.
Suspending G-series Communication line is entering a suspended state and
is not operational.
Serviced G-series Communication line is being serviced and is not
operational.
Special D-series Communication line is in the special state and is not
operational.
Exclusive D-series Communication line is in the exclusive state and is not
operational.