ASAP 2.8 Server Manual

ASAP Conversational Interface Commands
HP NonStop ASAP Server Manual—522303-007
6-21
CPU Command
DETAIL
displays all statistics for the specified CPU or system. Displays high PIN PCB
configuration and usage statistics for D-series and later systems. On C-series
systems, the display heading is named LCB, on D-series systems and later, the
display heading is named PCBX.
PERCENT
displays the percentage of the total resource values for Memory pages, Control
blocks (PCB, PCBX, LCB, and TLE), System, and MapPool.
USE
displays usage statistics for Memory pages, Control blocks (PCB, PCBX, LCB, and
TLE), System, and MapPool.
CONFIGURED
displays the configured values for Memory pages, Control blocks (PCB, PCBX,
LCB, and TLE), System, and MapPool.
HISTO
displays a histogram of CPU Busy, CPU Queue Length, and Memory Queue
length. This is the default for the CPU command. The output for the histogram field
is labeled M,Q.Busy.
AVG
displays the statistical averages across all running CPUs for the specified system
during each sample period. This is a one-line display per system.
STATE
shows all attributes that have an associated state.
TYPE
displays the CPU model. Some examples of the CPU types are CLX800, K20000,
S7000, and S70000.
TIME hh:mm m/d/y
defines the ending time of the display information in hours, minutes, month, day,
and year. For example, specifying “TIME 10:15” when RATE is 5 indicates that
statistics collected from 10:10 to 10:15 are to be displayed.
When a “?” appears immediately after the timestamp, it indicates that the statistics
are questionable and that there was a problem obtaining the statistics. Possible
reasons for questionable statistics include:
•
CPUs are down.